Cara install driver printer HP deskjet D2566 di UBUNTU HH 8.04

1. baca: di http://hplipopensource.com/hplip-web/index.html

2. Download HPLIP

3. file hasil download: hplip-2.8.12.run

4. Ketik dan jalankan perintah ini: 'sh hplip-2.8.12.run'

5. hasil:

good@good-laptop:~$ sh hplip-2.8.12.run
Creating directory hplip-2.8.12
Verifying archive integrity... All good.
Uncompressing HPLIP 2.8.12 Self Extracting Archive.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

HP Linux Imaging and Printing System (ver. 2.8.12)
HPLIP Installer ver. 5.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Thu-25-Dec-2008_08:14:52.log

\
note: Defaults for each question are maked with a '*'. Press to accept the default.


INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to chose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : a

Initializing. Please wait...


INTRODUCTION
------------
This installer will install HPLIP version 2.8.12 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 8.04.

Is "Ubuntu 8.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y


SELECT HPLIP OPTIONS
--------------------
Would you like to enable support for parallel (LPT:) connected printers? (y=yes, n=no*, q=quit) ? n


ENTER ROOT/SUPERUSER PASSWORD
-----------------------------
Please enter the root/superuser password:
Password accepted


INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubunbtu installation media inserted in the drive.

Please read the installation notes. Press to continue or 'q' to quit:


RUNNING PRE-INSTALL COMMANDS
----------------------------


CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.


RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo aptitude update (Pre-depend step 3)


DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
warning: A previous install of HPLIP is installed and/or running.
sudo aptitude remove --assume-yes hplip hpijs (Removing old HPLIP version)
warning: HPLIP removal failed. The previous install may have been installed using a tarball or this installer.
warning: Continuing to run installer - this installation should overwrite the previous one.


RUNNING POST-PACKAGE COMMANDS
-----------------------------


RE-CHECKING DEPENDENCIES
------------------------
OK


PRE-BUILD COMMANDS
------------------


BUILD AND INSTALL
-----------------
Running './configure --with-drvdir=/usr/share/cups/drv/hp/ --with-hpppddir=/usr/share/ppd/hpijs/HP --prefix=/usr --disable-qt4 --disable-foomatic-ppd-install --enable-doc-build --enable-qt3 --enable-gui-build --enable-foomatic-drv-install --disable-pp-build --enable-network-build --enable-dbus-build --disable-hpijs-only-build --enable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.


Build complete.


POST-BUILD COMMANDS
-------------------
sudo /bin/kill 5985 (Post-build step 1)


RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in
when you started this installer, you will need to either restart your PC or
unplug and re-plug in your printer (USB cable only). If you choose to restart,
run this command after restarting: sudo hp-setup (Note: If you are using a
parallel connection, you will have to restart your PC. If you are using
network/wireless, you can ignore and continue).

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : p
Please unplug and re-plugin your printer now. Press to continue or 'q' to quit:


PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.


semoga bermanfaat.

Browsing dengan textbased browser ELINKS

silahkan download disini.
password: elinks

cepat, ringan, tanpa gambar

Install xp dengan flash disk

Apa aja file2 yang dibutuhkan? Silahkan disiapin semua ya..
1. CD Windows XP
2. Flashdisk (kapasitas minimal 1 giga)
3. File USB_PREP8 yang bisa didownload di : Klik disini
4. File PeToUSB yang bisa didownload di : Klik disini
5. File Bootsect.exe yang bisa didownload di : Klik disini
6. 1 set Komputer yang pake Sistem Operasi Windows (misalnya Windows XP).
Setelah semuanya siap, langkah berikutnya adalah:
Misalnya kita udah buat folder baru di drive C: dengan nama foldernya sampepuas
Copy file usb_prep8.zip bootsect.zip dan PeToUSB_3.0.0.7.zip di folder sampepuas
Jadi di drive C:\sampepuas ada 3 file ya.
Ekstrak file usb_prep8.zip
caranya, klik kanan pada file tsb lalu pilih “Extract Here”
Ekstrak file bootsect.zip
caranya, klik kanan pada file tsb lalu pilih “Extract Here”
Ekstrak file PeToUSB_3.0.0.7.zip
caranya, klik kanan pada file tsb lalu pilih “Extract Here”
Copy file PeToUSB.exe ke folder USB_prep8
Klik dua kali file usb_prep8.cmd yang ada didalam folder USB_prep8
Nanti akan muncul “Press any key to continue” yang artinya “pencet apa aja dah. terserah lu”
Setelah dipencet akan tampil windows PeToUSB. Jangan tutup apapun! biarkan saja ya.
INGAT!!! File di USB Flashdisk anda harus diformat.
Kalo ada datanya, silahkan di backup dulu datanya atau di copy ke komputer anda.
Kalo udah, silahkan klik Start untuk mengformat Flashdisk
Setelah proses format selesai, jangan ditutup ya windowsnya.
Pada desktop, klik Start, pilih Run, ketik cmd (lalu tekan Enter atau klik OK)
ketik CD\ (lalu tekan Enter)
ketik cd sampepuas
ketik cd bootsect
ketik bootsect.exe /nt52 I: (I adalah drive USB)
jadi kalo drive USB lu adalah E berarti lu harus ketik :
bootsect.exe /nt52 E: (lalu tekan enter)
Kalo berhasil, nanti akan muncul tulisan “Bootcode was successfully updated on all targeted volumes.”
Tutup Command Prompt yang ini (jangan yang usbprep8 ya!!)
Tutup juga windows PeToUSB.
Pada windows Command Prompt yang usbprep8, tepatnya ditulisan Enter your choice :
Ketik angka 1 lalu tekan Enter. Silahkan browse ke drive CD Windows XP
Ketik angka 2 lalu tekan Enter. Masukkan huruf yang belum terpakai untuk nama drive, misalnya T
Ketik angka 3 lalu tekan Enter. Masukkan huruf tempat drive USB Flashdisk anda. misalnya H
Ketik angka 4 lalu tekan Enter. Mulai Proses copy ke USB Flashdisk.
Nanti ada pertanyaan apakah anda ingin mengformat drive T. Ketik y lalu tekan enter.
Kalo udah tekan enter lagi untuk melanjutkan.
Trus tekan enter lagi.
Nanti akan muncul popup, klik aja yes.
Klik yes lagi kalo ada popup yang muncul.
Klik yes untuk melakukan unmount virtual drive.
OK. Proses selesai.
Silahkan tutup windows Command prompt usbprep8
USB sudah bisa dipakai untuk melakukan instalasi Windows XP ke EeePC.
Sekarang colokin USB Flashdisk lu ke laptop EeePC.
Jangan lupa di laptop EeePCnya boot pertama kali pilih yang boot dari USB.
Caranya? pas nyalain laptopnya, trus tekan F2.
Nah udah masuk BIOS kan? yang layarnya warna biru tuh…
Bootnya pilih yang USB ya.
Nah, nanti pas instalasi, pilih yang mode TEXT SETUP.
gw anggap lu semua dah pada tau cara install XP, jadi ga usah gw jelasin lagi disini.
intinya ya lu harus buat/hapus partisi lu, trus formatnya pilih yang NTFS.
setelah komputer lu restart, selanjutnya pilih yang GUI Mode (JANGAN yang TEXT MODE!!)
kalo restart lagi, pilih lagi yang GUI MODE.
Nah, kalo instalasi XP udah selesai, jangan cabut USB Flashdisk lu ya!
Kalo udah masuk ke desktop XP, baru deh lu boleh cabut Flashdisknya.
Jangan lupa di “Safely Remove Hardware” dulu ya..
Karena XPnya udah jalan, nanti di BIOS di balikin lagi ya booting-nya ke hardisk.

Semoga tutorial ini bermanfaat.

sumber: dari berbagai sumber blog

Setting HP 2280i sebagai modem dengan kartu TRUFF(starone) dengan kabel CA 42 (usb)

Jalankan perintah diterminal untuk mengetahui device modemnya: wvdialconf

Setting HP 2280i dengan kartu TRUFF(starone) di UBUNTU (GOS):

1. edit wvdial.conf dengan perintah di terminal: sudo gedit /etc/wvdial.conf :

[Dialer truff]
Modem Type = USB Modem
Baud = 230400
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
Phone = #777
Username = XXXXX@indosatm2
Password = XXXXX
SetVolume=0
Dial Command = ATDT
Init1=ATZ
Init2=AT+CRM=1
FlowControl= Hardware (CRTSCTS)

2. jalankan diterminal:

good@good-laptop:~$ sudo wvdial truff
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CRM=1
AT+CRM=1
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
~[7f]}#@!}!}!} }3}"}&} } } } }#}%B#}%}'}"}(}"W}0~
--> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}"} }3}"}&} } } } }#}%B#}%}'}"}(}"o}1~
--> PPP negotiation detected.
--> Starting pppd at Sun Dec 21 06:45:09 2008
--> Pid of pppd: 7241
--> Using interface ppp0
--> pppd: X�[06][08]��[06][08]
--> pppd: X�[06][08]��[06][08]
--> pppd: X�[06][08]��[06][08]
--> pppd: X�[06][08]��[06][08]
--> local IP address 114.58.1.246
--> pppd: X�[06][08]��[06][08]
--> remote IP address 124.81.78.250
--> pppd: X�[06][08]��[06][08]
--> primary DNS address 202.155.0.10
--> pppd: X�[06][08]��[06][08]
--> secondary DNS address 202.155.0.15
--> pppd: X�[06][08]��[06][08]

Setting HP 2280i dengan kartu TRUFF(starone)

Setting HP 2280i sebagai modem dengan kartu TRUFF(starone) di UBUNTU (GOS) dengan kabel serial:
* jalankan dulu di terminal perintah: wvdial conf


1. edit wvdial.conf dengan perintah di terminal: sudo gedit /etc/wvdial.conf :

[Dialer truff]
#modem pakai HP cdma 2280i dengan kabel serial
Modem = /dev/ttyS0
Baud = 115200
Modem Type = nokia
Phone = #777
ISDN = 0
#timebased ==> user name: XXXX@indosat.net.id
#volumebased ===> user name: XXXXXX@indosatm2
Username = XXXXX@indosat.net.id
Password = XXXXXX

2. jalankan di terminal: sudo wvdial truff

Bahan matakuliah microwave

silahkan download disini.
password: stgm

Pengumuman Tugas Kelas A, Elkakom

Tugas sesuaikan dengan halaman Buku!.


kumpulkan hari Selasa, 23 Desember 2008.
jam 09:00 wib